JONSBO D300 MATX Case Curved Tempered Glass Sea View Type-C Gen2

JONSBO D300 MATX Case Curved Tempered Glass Sea View Type-C Gen2

Product Overview
The Jonsbo D300 is a sister model of the D301, which breaks through the use of curved integrated curved tempered glass design, providing a 270 degree ultra wide view display hardware.The R-angle transition is natural, elegant, and rounded, showcasing a unique host temperament. The top cover and backline sides are equipped with large MESH small holes combined with 10 sets of fan positions, and multiple combination cooling methods are used to balance light efficiency and air ducts. The 5-bit PCI slot design is more user-friendly and supports the installation of 40 series graphics cards. It provides multi angle side view and allows for more reasonable planning of desktop space.


Compatible with M-ATX Backplug motherboard
Supports the cable holes required for most back plugged motherboards, optimizing cable management effects
Standard motherboard: Backline space of 31mm
Backward motherboard: with a total capacity of 38mm including connectors/plugs


Tech Spec
Product model: D300
Color: Black
Product dimensions: 236.4mm (W) * 420.9mm (H) * 460.2mm (D)
Compatible motherboard: ITX/M-ATX
Drive slot: Backboard: 2.5 "SSD * 2 or 3.5" HDD * 1+2.5 "SSD * 1
Bottom: 2.5 "SSD * 1 or 3.5" HDD * 1
Front interface: USB3.2 Gen2 Type-C * 1/USB3.0 * 1/AUDIO * 1&MIC * 1
Fan: Top: 120mm * 3 or 140mm * 2 (optional); Side: 120mm * 3 (optional); Back: 120mm * 1 or 140mm * 1 (optional); Bottom: 120mm * 1 (optional); Power room: 120mm * 2 or 140mm * 1 (optional)
Water cooling support: top plate 240/360, rear plate 120/140
Power support: ATX ≤ 200mm
CPU heat sink support height: ≤ 180mm
Graphics card support length: ≤ 430mm